How to Stack Milky Way Photos (Mac, Windows, Linux)
Shoot 10 to 30 raws on a tripod, keep them in one folder, and stack them with the stars aligned and the ground sharp. The whole session, on Mac, Windows or Linux.
One 20-second frame at ISO 3200 on a 14mm lens shows the Milky Way, and it shows a lot of grain with it. Twenty of those frames stacked show the same sky with about a quarter of the noise. That is the whole reason to stack a nightscape, and it needs nothing more than the tripod you already have.
This is the session as I would shoot and process it, using Akastroid’s Nightscapes page from version 1.3.32. The shooting half applies to any stacker.
Shooting the frames
Set everything by hand and then do not touch it. Same aperture, same shutter speed, same ISO, same focus, same white balance for every frame. A stacker can line up frames that moved; it cannot match frames that were exposed differently.
A starting point for a wide lens on a full-frame camera:
- Lens: 14mm to 24mm, as wide open as the corners allow.
- Shutter: 10 to 25 seconds. Shorter on a high-resolution body or a longer lens; the NPF rule gives the number for your camera.
- ISO: 1600 to 6400. Higher than feels comfortable is fine, because stacking is what takes the noise out.
- Format: raw. JPEG has already thrown away what the stack needs.
- Frames: 10 to 30, one straight after another. Use an intervalometer or the camera’s interval mode so you do not knock the tripod.
Turn off long-exposure noise reduction in the camera. It doubles the time between frames, and during that gap the sky keeps turning.
How many frames
Noise falls with the square root of the number of frames. Ten frames is about three times cleaner than one. Twenty is about four and a half. Thirty is about five and a half, so the last ten frames buy far less than the first ten. How stacking works has the reasoning.
On a tripod there is a second limit. Thirty frames of 20 seconds is ten minutes, and in ten minutes the sky turns by two and a half degrees. The stars still align, but the edge of the frame that only some frames covered gets thinner. Twenty frames is a good default.
Keeping them in one folder
Copy the night’s frames off the card into a folder of their own, one folder per composition. If you moved the tripod halfway through, that is two folders.
Milky Way over the lake/
DSC_4410.NEF
DSC_4411.NEF
...
DSC_4429.NEF
No darks or flats are needed for this. If you also shot a long foreground frame for blending later, keep it out of this folder.
Opening the folder
On the Nightscapes page, press Choose folder and pick that folder. You can also drop several raws onto the window together. Either way they are stacked as a nightscape:
- the sky is aligned on the stars, so they stay round;
- the ground is kept sharp, so the trees do not smear;
- the light-pollution gradient is removed, which matters on a horizon with a town under it;
- the colour is kept natural and the noise is reduced.
We checked the stacking against Sequator on real test sets. Sequator only runs on Windows; there is a comparison page if you are coming from it.
Choose file is the other button. It opens one picture as it is, with no stacking. A single raw gets a plain stretch so you can see it. That is the button for a stack you already made elsewhere, or for a phone shot.
Editing the result
The stack opens in Edit. On a Milky Way the sliders I use most are Exposure to lift the faint sky, Highlights to hold back the glow on the horizon, and Saturation, gently, for the core. Denoise and Sharpening are there if the stack still needs them. Frame turns, mirrors and crops.
Exporting
Export a 16-bit TIFF if you will edit further or print. PNG and FITS are there too, and JPEG for sharing. The export is the picture on screen.
Image Boost, if you want it
Image Boost is an optional extra at the top of Edit. The stacking and processing above use no AI. Image Boost sends that one picture to an AI model, shows the answer beside your own, and lets you keep either. It runs only when you press it and costs one credit a picture. It is the only step that sends your picture anywhere.
When the stack goes wrong
Stars are oval in the corners. That is coma from the lens, and it is in every frame, so stacking cannot fix it. Stop down one stop next time.
The ground looks soft. Check that the tripod did not move. A frame where someone walked past with a torch, or the wind caught the camera, is better left out of the folder.
The sky edges are noisier than the middle. The frames covered slightly different sky, so the edges have fewer frames in them. Shoot fewer, or crop a little.
If you have shot a tracked session with darks and flats instead, the layout is different, and your first DSLR stack covers it.
Try it on your own data
Akastroid runs its processing on your own frames and logs each step it took.
Download Akastroid